WQJY-50 light duty profile bending machine
This WQJY-50 profile bending machine,the top die is the main drive roll,it does the elevation movement through the hydraulic tank and rotate by the electric motor.The bottom die rotate by the engine,gear box and the torque which output from the gear.It's compact and easy maintenance.
Description
Technical Parameters:
|
WQJY-50 |
|
1 |
Yield limit |
245Mpa |
2 |
Down roller speed |
180mm/ min |
3 |
Up axis diameter |
70 mm |
4 |
Down axis diameter |
70mm |
5 |
Up mold diameter |
180 mm |
6 |
Bottom mold diameter |
180mm |
7 |
Bending speed |
5m/min |
8 |
Hydraulic pressure |
19.5Mpa |
9 |
Motor power |
1.5KW |
10 |
Hydraulic motor |
1.5KW |
11 |
Weight |
About 550KGS |
12 |
Dimension |
1000x1000x1650mm |
Main structure:
1.This WQJY-50 profile bending machine,the top die is the main drive roll,it does the elevation movement through the hydraulic tank and rotate by the electric motor.The bottom die rotate by the engine,gear box and the torque which output from the gear.It's compact and easy maintenance.
2.The equipment consists of working part which is welded at the whole bottom pallet and the transmission part.The working parts are consisted by one bracket,three molds and some accessories.Through adjust the height of the upper mold to make the function of bending.The transmission parts are consisted by hydraulic station,engine,gear and other accessories.
3.Through the meshing of the output gear of the gear box and the mold gear to rotate the down mold.
4. The hydraulic oil of the hydraulic tank push the piston rod to make the upper mold elevate.
5. When rolling complete,lift the upper mold and take off the work piece from the upper and lower mold.
Produce capacity:
Plate, flat bending |
Max. Section size |
80x15mm |
Plate, vertical bending |
Max. Section size |
50x10mm |
Tube bending |
Max. Section size |
38x2mm |
Rod bending |
Max. Section size |
30mm |
Square bending |
Max. Section size |
50x30x3mm |
Channel bending |
Max. Section size |
50x25x5mm |
Angle,inner way |
Max. Section size |
35x35x5mm |
Angle,outer way |
Max. Section size |
40x40x5mm |